OPERATIONS

DISPLAY PANEL SETUP

NOTE: If the touch screen option has been purchased for the Command Console, the touch screen manufacturer’s software must first be installed on the computer being used with the Command Console. Follow manufacturer’s instructions and user manual for software installation and use.

This following section explains how to use the control buttons to adjust, image clarity and image position on the screen. In particular it discusses:

•The function of each of the push-button controls

•How to reset previously saved settings or return to factory settings

•Tips and techniques

NOTE: The control buttons allow the user to control backlight operations; to store settings, and to revert to factory-saved settings.

15

Doc# 27-0023UM Rev 1.0 Issued 09/04