OPERATIONS

ONSCREEN MENUS

NOTE: When the unit is initially connected, no pip screens are enabled, and therefore can not appear. See section titled “pip configuration” for how to enable pip screens.

To access the onscreen display main menu, press the menu button on the front of the panel. All 2UCCs functions are controlled using the Main Menu’s subtopics.

These submenus can be accessed using the Up and Down buttons on the display panel. See sections below for specifi cs regarding the submenus.

Main Screen Picture Adjust

Use the Up and Down buttons to highlight the “Picture Adjust” option. Press the “Menu” button to access the submenu.

Use the Left and Right buttons to increase and decrease the Brightness and Contrast characteristics of the screen. Press “Exit” to return to the Main Menu. The new adjustments will be applied automatically.

NOTE: Brightness of the main screen can also be adjusted without entering the Main Menu using the up and down display buttons.

16

Doc# 27-0023UM Rev 1.0 Issued 09/04