TROUBLESHOOTING

No Picture-in-Picture Option Appears on Main Menu

If no PIP menu is available from the Main Menu (where PIP is installed), the PIP has not been detected by the controller. Recycle power to the unit by disconnecting power and then reconnecting power. If no PIP is detected again when the Main Menu is powered up again, call Z Microsystems’ Customer Support Department for assistance.

No Picture-in-Picture Display Image

There are a few scenarios which may cause the image on the optional PIP to be black. To eliminate these concerns, follow the instructions below in the order they are presented:

1.Ensure the PIP is viewing something with contrast and shape and can be easily detected under normal viewing conditions.

2.If the PIP is viewing something with these qualities, and should be easily detected, the values associated with Contrast and Color Balance may re- quire adjustment. To ensure the Contrast and Color Balance values are not the cause of the black screen, set the values to the factory default settings.

3.In some Command Console confi gurations, there are two inputs for the RGB channel and one input for the Video channel. Ensure the correct channel is chosen for the desired PIP.

4.If the black screen is for the RGB PIP, perform an Auto Adjust in the PIP submenu.

5.If no PIP image appears, call Z Microsystems’ Customer Support Depart- ment for assistance.

36

Doc# 27-0023UM Rev 1.0 Issued 09/04