•To avoid a static charge when drying is com- pleted, use either a fabric softener when you are washing the laundry or a fabric condition- er specifically for tumble dryers.
•Garments padded with
•Also, fabrics containing residue of setting lo- tions or hair sprays, nail solvents or similar solutions must not be machine dried in order
to avoid the formation of harmful vapours. The detergent and any additives must be placed in the appropriate compartments of the dispenser drawer before starting the wash pro- gramme.
If using liquid detergents, a programme with- out prewash must be selected.
Your appliance incorporates a
Follow the product manufacturer’s recommen- dations on quantities to use and do not ex- ceed the «MAX» mark in the detergent dispenser drawer.
Garment labels
For drying, follow the indications given on the manufacturer’s labels:
•
= May be tumble dried
•
= Drying at high temperature
•
= Drying at reduced temperature
•
= Do not tumble dry.
Drying cycle duration
The drying time may vary depending on:
•speed of the final spin
•dryness degree required (iron dry, store dry)
•type of laundry
•weight of the load size .
The average drying time for a timed drying are indicated in the «Drying programmes» chapter. The experience will help you to dry your laundry in a more suitable way, according to the differ- ent fabrics. Take note of the duration drying time of the already performed cycles.
Additional drying
If the laundry is still damp at the end of the dry- ing programme, select a short drying cycle again.
Warning! Do not over dry the laundry in order to avoid creasing of fabrics
or garment’s shrinking.
First use
• Ensure that the electrical and water connections comply with the installation instructions.
•Remove the polystyrene block and any material from the drum.
•Before the first wash, run a cotton cycle at the highest temperature without any
Personalisation
laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of deter- gent into the main wash compartment and start the machine.
Acoustic signals
The machine is provided with an acoustic de- vice, which sounds in the following cases:
•at the end of the cycle
•if there is a fault.
By pressing the 4 and 5 buttons simultaneously for about 6 seconds, the acoustic signal is de-
activated (except if there is a fault). By pressing these 2 buttons again, the acoustic signal is re- activated.
Child safety lock
This device permits you to leave the appliance unattended so you do not need to worry that children might be injured by or cause damage
www.zanussi.com | 13 |
|
