When no more water comes out, unscrew the pump cover by turning it
Clean the filter under a tap, to remove any traces of fluff.
Remove foreign bod- ies and fluff from the filter seat and from the pump impeller. Check carefully whether the pump im- peller rotates (it ro- tates jerkily). If it doesn’t rotate, please contact your Service Centre.
Put the cap back on the emergency emp- tying hose and place the latter back in its seat.
Replace the filter into the pump by inserting it correctly into the special guides. Screw the pump cov- er firmly by turning it clockwise.
Caution! When the appliance is in use
and depending on the programme selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When refitting the pump cover, ensure it is securely re-
tightened so as to stop leaks and young children being able to remove it.
Cleaning the water inlet filters
Important! If the appliance doesn't fill, takes long to fill with water, the starting button blinks yellow or the display (if available) shows the relevant alarm (see chapter "What to do if..." for more details), check if the water inlet filters are blocked .
To clean the water inlet filters:
• Turn off the water tap.
• Unscrew the hose from the tap.
• Clean the filter in the hose with a stiff brush.
•Screw the hose back onto the tap. Make sure the connection is tight.
•Unscrew the hose from the machine. Keep a rag nearby because some water may flow.
•Clean the filter in the valve with a stiff brush or with the piece of cloth.
35° | 45° |
www.zanussi.com | 19 |
|
