Zanussi ZCG560G user manual Environment concerns, Levelling, Adjustment of the ad justment screw

Models: ZCG560G

1 20
Download 20 pages 25.37 Kb
Page 15
Image 15
Adjustment of the ad-

Change of the type of

gas

From natural gas to liq- uid gas

From liquid gas to nat- ural gas

Adjustment of the ad-

justment screw

Fully tighten the adjust- ment screw in.

Release the adjustment screw approximately 3/4 of a turn.

1.Remove the bottom plate of the oven cavity (A) to get access to the oven burner (B).

2.Release the screw (C) which keeps the burner in po- sition.

3.Carefully move the burner off the injector support (D).

Slowly move it to the left side. Make sure that the burner bush stays on the burner mouthpiece. Do not apply force to the wire of the thermocouple conduc- tor (F).

4.Release the injector (D) with a 7 mm socket spanner and remove it. Replace it with the necessary one.

5.Assemble the burner in opposite sequence.

6.Replace the gas type sticker near the gas supply

ramp with the one related to the new gas type.

Minimum level adjustment of the gas oven burner:

1.Remove the oven control knob.

2.Adjust the adjustment screw (A) with a thin-bladed screwdriver.

A

3.Attach the oven control knob.

4.Light the oven burner. Refer to "Gas oven cooking: Ignition of the gas oven burner".

5.Set the oven control knob to maximum and let the oven heat for a minimum of 10 minutes.

6.Turn the oven control knob from maximum to mini- mum.

Control the flame. If the flame goes out, do the procedure from point 1 to point 6 again. There must be a small regu- lar flame on the oven burner crown.

The manufacturer declines liability if you do not obey these safety measures.

Levelling

Use small feet on the bottom of appliance to set same lev- el of cooker top surface with other surfaces

Environment concerns

The symbol Levelling on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential

www.zanussi.com

negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.

15

Page 15
Image 15
Zanussi ZCG560G user manual Environment concerns, Levelling, Adjustment of the ad justment screw