Installation instructions

Important – safety requirements

•Natural Gas versions of this appliance are available.

•Check that this model is suitable for the type of supply available. This appliance must be installed and/or serviced by a competent person in accordance with the Gas Safety (Installation and Use) Regulations Current Editions and the I.E.E. Wiring Regulations.

•Detailed recommendations are contained in the following British Standard Codes of Practice – BS.6172, BS.5440: Part 2 and B.S.6891. All British Standards must be ‘Current Editions’.

WARNING!

This appliance must be installed by a qualified electrician / competent person (CORGI Registered). Safety may be impaired if installation is not carried out in accordance with these instructions.

Before connecting the appliance make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This is situated on the front frame of the appliance and can be seen upon opening the door. Alternatively the rating plate may also be found on the back or top of some models (where applicable).

Do not alter the electrical circuitry of this appliance.

Provision for ventilation

•This appliance is not connected to a combustion products evacuation device. It shall be installed and connected in accordance with the current installation regulations. Particular attention shall be given to the relevant requirements regarding ventilation.

•The room containing the appliance should have an air supply in accordance with BS.5440: Part 2 Current Edition. All rooms require an openable window or equivalent and some rooms will require a permanent vent as well. For room volumes up to 5m3 an air vent of 100cm2 is required: for room volumes between 5m3 and 10m3 an air vent of 50cm2 is required. If the room has a door that opens directly to the outside, no air vent is required. For room volumes that exceed 11m3 no air vent is required. If there are other fuel burning appliances in the same room, BS.5440: Part 2 Current Edition should be consulted to determine the requisite air vent requirements.

•Prolonged intensive use of the appliance may call for additional ventilation, for example opening a window, or more effective ventilation, for example increasing the level of mechanical ventilation where present.

27

Page 26 Page 28
Page 27
Image 27
Zanussi ZKG5020 manual Installation instructions, Provision for ventilation
Page 26 Page 28

ZKG5020 specifications

The Zanussi ZKG5020 is a stylish and efficient built-in gas hob designed to elevate your cooking experience. This contemporary appliance features a sleek aesthetic, complementing modern kitchen designs while offering a range of practical features that enhance functionality.

One of the standout features of the Zanussi ZKG5020 is its high-efficiency burners. With gas burners designed to deliver rapid heat, cooking times are significantly reduced, allowing you to prepare meals quickly and effectively. The hob includes a range of burner sizes, making it versatile enough to accommodate anything from simmering sauces to boiling pasta or frying meats. The powerful wok burner is particularly notable, delivering high heat for stir-frying and other intensive cooking methods.

The temperature control on the ZKG5020 is precise and responsive, providing you with the flexibility to adjust the heat according to your cooking requirements. Whether you’re looking for a gentle simmer or a full boil, this hob allows you to achieve your desired results with ease.

Safety is a paramount consideration in the design of the Zanussi ZKG5020. It incorporates an automatic ignition system that lights the burners quickly and reliably. Additionally, each burner features a flame failure safety device, which automatically cuts off the gas supply if the flame goes out, ensuring peace of mind while cooking.

The surface of the hob is made from durable materials, designed to withstand the rigors of daily use. The stainless steel finish not only contributes to a modern look but also makes cleaning after cooking straightforward. The removable enamel supports provide stability for pots and pans while being easy to maintain.

Moreover, the Zanussi ZKG5020 is designed for convenient installation, featuring a built-in design that seamlessly integrates into your kitchen worktop. Its dimensions make it suitable for various kitchen layouts, maximizing the efficient use of space.

In summary, the Zanussi ZKG5020 is an excellent choice for home cooks who value style, efficiency, and safety. With its modern design, high-performance burners, and user-friendly features, it promises to enhance any culinary experience, making it a worthy addition to contemporary kitchens.
Top Page Image Contents