Activating the Power Function

Using the power function you can increase the power of both front cooking zones for 10 minutes. With this function you can, for example, bring a large quantity of water rapidly to the boil or brown meat.

To switch on the power function, the cooking zone must be selected (decimal point in the display). Touch the “Power-function” sensor field . p appears in the display. The power function is now active.

3The power function will be activated for a maximum of 10 minutes. Following this the cooking zone automatically switches to heat setting 9.

The power function can be switched off in the following way:

•Touching the “Power function” sensor field .

•Touching the sensor field _.

1As soon as the power function is activated for one of the front cooking zones, less heating power is given to the rear cooking zone.

If the power function for the front right cooking zone is activated, the rear left cooking zone can attain a maximum heat setting of “8”.

If the power function for the front left cooking zone is activated, the rear right cooking zone can attain a maximum heat setting of “7”.

If a higher setting than 7 or 8 is set for the rear cooking zones, the display for the rear cooking zone concerned will show the differing settings alternately (e.g., 7 and 9).

As soon as the power function has ended (after a maximum of 10 minutes), the rear cooking zones automatically revert to their previously set heat setting.

Switching off a cooking zone

1.Select the required cooking zone with the cooking zone sensor fields.

2.Touch sensor fields and simultaneously to switch off or turn sensor field back to zero.

3A cooking zone may only be switched off when the decimal point is on in the cooking zone display.

13