Cooking with the Automatic Heating-Up Function

All four cooking zones of the cooking field can be controlled in nine stages and have an automatic heating-up function:

–1, Lowest heat setting

–9, Highest heat setting

–a, Heating-up function.

With the automatic heating-up function (a), the cooking zone operates for a certain time at full capacity and then automatically switches back to the heat setting selected for further cooking.

The duration of the automatic heating-up function depends on the heat setting selected for further cooking.

1.Select the required cooking zone with the cooking zone sensor fields. The decimal point in the associ- ated display field illuminates.

2.With the or sensor fields select heat setting 9. Stop briefly and touch thesensor field again.

a lights up in the heat setting display.

3.Next, touch the sensor field and set the required continued heat setting 1 to 8. The heat setting se- lected for further cooking then is displayed.

After 5 seconds, a appears in the display again instead of heat setting selected for further cooking. The heat setting is displayed again after the heating- up time has ended.

3If you select a higher heat setting when the automatic function is in operation, e.g. from 3 to 5, the previous heating-up time is taken into account. If you select a lower setting, then the automatic function is brought to an immediate end. If you start cooking again on a cooking zone that is still warm, the automatic heating- up function uses the residual heat. This saves time and energy.

14