Cooking without the Automatic Heating-Up Function

1.For heating up/browning, select a high power.

2.As soon as steam forms or the fat is hot, switch back to the required heat setting for the remainder of the cooking time.

3.Reset to zero in order to end cooking.

2 Note:

When cooking with the induction cooking zone you should take into account that

–the heating-up times are reduced by the direct en- ergy transfer to the pan!

–the cooking process stops immediately after the cooking zone is switched off (no boiling over!)

Locking/Unlocking the Control Panel

With the exception of the “On/Off” sensor field the control panel can be locked at any required time during cooking in order to prevent adjusting the settings such as when wiping over with a cloth. This function is also suitable as a child safety feature.

1.Touch the “Lock” sensor field until the control indi- cator comes on.

2.To release the lock touch the “Lock” sensor field again continuously until the control indicator goes out.

3Child safety feature! If the hob is completely switched off using the “On/Off” sensor field while the lock is on, then the lock will still be active when the hob is switched on again. To reactivate the cooking zones, the locking function must be cancelled as described above.

15