2 
Printer Installation
Installing the P110i Printer
Caution • Do not power the printer with USB attached to your computer at this time. The driver will prompt you when it is time to plug in and power up your
printer.
Connecting the P110i Printer
The following instructions will guide you through the installation of the P110i printer.
Caution • Limit electrical power supplied to the P110i Printer to 24 VDC. Limit excess current draw to 16 amps or less, using an associated circuit breaker or other such device. Never operate the printer in a location where operator, computer, or printer can get wet. Personal injury could result. The printer must be connected to an earthed electrical power supply and properly protected against electrical surges and grounding faults. The power supply pack can only be replaced by the same product from the manufacturer.
1.Place the printer in a location that allows easy access to all sides. The printer should never be operated while resting on its side or upside down
P110i User’s Manual | 7 |
