
5
Cleaning
Cleaning System
Caution • PROTECT YOUR FACTORY WARRANTY!
The recommended maintenance procedures must be performed to maintain your factory warranty. Other than the recommended cleaning procedures described in this manual, allow only Zebra authorized technicians to service the P110i Printer.
•NEVER loosen, tighten, adjust, or bend, etc. a part or cable inside the printer.
•NEVER use a high pressure air compressor to remove particles in the printer.
SYour P110i Printer includes a simple cleaning system using
When to Clean
After approximately 1000 color cards have been printed, the printer LCD will prompt
CLEAN PRINTER, or when print quality has been degraded.
How to Clean
1.Leave power on.
2.Press and hold the
3.When the cleaning cycle is initiated, the LCD message REMOVE RIBBON THEN CLOSE LID will display.
P110i User’s Manual | 27 |