Zebra Technologies P110I user manual Card Feeder Cover Stack

P110i Printer Setup

Loading Cards

4.Holding the card deck by the sides, hold it vertically against a flat surface such as a desktop. If the deck is too thick for your hand to hold it comfortably, use about half a deck at a time.

5.Push the stack back and forth to an angle of about 45° from vertical, so as to separate all of the cards.

6.Restore the card stack to its original squared-off condition, and place the cards in the input hopper.

7.Place stack of up to 100 cards into card feeder and close the card feeder cover. When card feeder cover is closed, the card guide locking mechanism will automatically be released.

CARD FEEDER

COVER

CARD

STACK

CARD

FEEDER

20 P110i User’s Manual 980515-001 Rev. A