Front Panel Controls

Front Panel LCD

 

Table 7 • Standard LCD Displays (Page 2 of 16)

 

 

Parameter

Action/Explanation

 

 

TEAR OFF

Adjusting the Tear-Off Position

 

This parameter establishes the position of the labels over the tear-off/peel-off bar

 

after printing.

 

Each press of an oval adjusts the tear-off position by four dot rows.

 

• Press the right oval to increase value.

 

• Press the left oval to decrease value.

 

Default: +0

 

Range: –120 to +120

 

 

PRINT MODE

Selecting Print Mode

 

Print mode settings tell the printer the method of label delivery that you wish to use.

 

Be sure to select a print mode that your hardware configuration supports because

 

some of the selections displayed are for optional printer features.

 

• Press either oval to display choices.

 

Default: Tear-Off

 

Selections: Tear-Off, Peel-Off, Cutter, Applicator, Rewind

 

Note • Only Tear-Off mode is supported.

 

 

MEDIA TYPE

Setting Media Type

 

This parameter tells the printer the type of media that you are using. Selecting

 

continuous media requires that you include a label length instruction in your label

 

format (^LLxxxx if you are using ZPL or ZPL II).

 

When non-continuous media is selected, the printer feeds media to calculate label

 

length (the distance between two recognized registration points of the inter-label

 

gap, webbing, or alignment notch or hole).

 

• Press either oval to display choices.

 

Default: Non-Continuous

 

Selections: Continuous, Non-Continuous

 

 

SENSOR TYPE

Setting the Sensor Type

 

This parameter tells the printer whether you are using media with a web (gap/space

 

between labels, notch, or hole) to indicate the separations between labels or if you

 

are using media with a black mark printed on the back. If your media does not have

 

black marks for registration on the back, leave your printer at the default (web).

 

• Press either oval to display other choices.

 

Default: WEB

 

Selections: WEB, MARK

 

 

23063L-003 Rev. 2 12/23/04

R110Xi/R170Xi User Guide

45