Front Panel Controls
Front Panel LCD
Table 7 • Standard LCD Displays (Page 6 of 16)
ParameterAction/Explanation
INIT FLASH MEM Initialize Flash Memory
Caution • Perform this operation only when it is necessary to erase all previously stored information from Flash memory.
1.When the LCD displays INITIALIZE CARD, press the right oval to select YES. (If you are prompted for a password, enter your password using the instructions in
The LCD asks INITIALIZE FLASH.
2.Press the right oval to select YES. The LCD asks ARE YOU SURE?.
3.Do you wish to continue?
•Press the left oval to select NO to cancel the request and return to the INIT FLASH MEM prompt.
•Press the right oval to select YES and begin initialization. When formatting is complete, INIT FLASH MEM displays.
SENSOR PROFILE Sensor Profile
The media sensor profile may be used to troubleshoot registration problems that may be caused when the media sensor detects preprinted areas on the media or experiences difficulty in determining web location.
•Press the right oval to start this standard calibration procedure and print a media sensor profile.
Figure 31 shows a media sensor profile. If the sensitivity of the media and/or ribbon sensors must be adjusted, use Calibrate Media and Ribbon Sensors on page 50 to adjust the media and ribbon sensor sensitivity.
Figure 31 • Media Sensor Profile
R110Xi/R170Xi User Guide | 49 |