MD6210M
10. Storage
WARNING
•When draining fuel, please be careful not to spill it. If fuel is spilt, wipe off thoroughly. In addition, please be sure to close the storage container cap tightly.
IMPORTANT
•If fuel is left in the engine for protracted periods, the inside of the carburetor may become clogged and cause engine malfunction (faulty starting and insuffi- cient output).
•During storage, slightly loosen the cap of the chemi- cal fluid tank. If screwed too tightly, the gasket may become distorted.
On completion of all work procedures, when not plan- ning to use again for a protracted period please carry out the following
1.Clean the chemical fluid tank and nozzle.
2.Remove dirt from the sprayer, inspect it for any dam- age or looseness, and, if any abnormality is found, correct it thoroughly in preparation for the next time you use the unit.
3.Drain the fuel tank.
4.Start the engine, and leave it in idling condition until all the fuel inside the carburetor is spent and the en- gine comes to a natural stop.
5.Remove the spark plug and put a few drops (1 to 2 cc) of
6.After oiling the throttle lever and other metal parts with
G B
11. Disposal
•When you dispose of the machine, do not disassemble the machine.
•Do not simply discard empty chemical containers, but dispose of them safely by incinerating, burying, or another similar method. In addition, please take ev- ery care that the water used to clean spraying tools does not create any hazard.
•When disposing your machine, fuel or oil for the ma- chine, be sure to allow your local regulations
