MD6210M
2. Specification
MODEL |
|
| MD6210M |
|
|
|
|
Dimensions (LxWxH)** |
| mm | 354x520x740 |
Dry weight* |
| kg | 12.7 |
Fuel tank capacity |
| liter | 1.8 |
Engine type |
|
| Air cooled |
Displacement |
| cm3 | 62.0 |
Air filter |
|
| Half wet polyurethane foam |
Carburetor |
|
| Diaphragm, rotary valve type |
Ignition system |
|
| C.D.I. |
Spark plug |
|
| NGK BPMR7A |
Operating engine speed* |
| rpm | 2000 to 8900 |
Fuel consumption |
| liter/h | 1.9 |
Container capacity |
| liter | 18 |
Discharge | Water | l/min | 4 |
Longitudinal coverage | Watet Horizontal | m | 12 |
| Water Vertical | m | 12 |
* with standard pipe **without pipe
Specifications are subject to change without notice.
3. Warning labels on the machine
(1) (2) (3) (4)
(6)
(1)WARNING! The machine canbe a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the opera- tor or others.
(5)(2) Read owner’s manual carefully and make sure you understand the instructions before using the machine.
(3)Wear a protective mask, eye and ear protection.
(4)Wear foot protecion.
(5)Wear gloves.
(6)Hot surface
Avoid contact the hot surface during and immediately operation.
Keep all children, bystanders and helpers 15 meters away from the machine.
If warning label peels off or becomes soiled and impossible to read, you should contact the dealer from which you purchased the product to order new labels and affix them in the required location(s).
Never modify your machine.
We won’t warrant the machine, if you use the remodeled machine or if you don’t observe the proper usage written in the manual.
4.Symbols on the ma- chine
For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications, please be careful not to make a mistake.
The port to refuel the “MIX GASOLINE” Position: FUEL TANK CAP
The direction to close the choke Position: AIR CLEANER COVER
The direction to open the choke Position: AIR CLEANER COVER
