Zenoah MD6210M Precautions Before Spraying, Precautions When Transporting Chemicals, Fuel

Models: MD6210M

1 18
Download 18 pages 35.78 Kb
Page 7
Image 7
PRECAUTIONS BEFORE SPRAYING

MD6210M

PRECAUTIONS WHEN TRANSPORTING CHEMICALS 5. For safe operation

around 30 ~ 40 minutes per ses- sion, and take 10 ~ 20 minutes of rest between work sessions. Also try to keep the total amount of work performed in a single day under 2 hours or less.

PRECAUTIONS WHEN TRANS- PORTING THE SPRAYERFUEL WARNING

If you don’t observe the working time, or working manner, Repeti- tive Stress Injury (RSI) could oc- cur.

If you feel discomfort, redness and swelling of your fingers or any other part of your body, see a doc- tor before getting worse.

PRECAUTIONS BEFORE SPRAYING

Make sure you have the correct protective clothing, headgear, rubber gloves and boots, a pro- tective mask, goggles, a towel, protective cream, etc., to prevent chemicals from coming into con- tact with your skin or entering your lungs. When spraying, please wear this protective gear to pre- vent any risk of injury.

1.Protective headgear

2.Protective goggles

3.Protective mask

4.Rubber boots

5.Ear muffs

6.Neck covering

7.Protective clothing

8.Rubber gloves

9.Protective clothing

Please store chemicals in a locked storage box, locker, or other safe place out of the reach of children.

Carefully read the instructions for using the chemicals, and famil- iarize yourself with the level of tox- icity, method of use, etc.

Please pay all due consideration to the area in which you will be spraying, to ensure that you do not pollute the water supply, riv- ers, lakes, ponds, etc., or cause any damage to residents, passers-by, livestock, etc.

Prepare yourself physically on the day before spraying, by for ex- ample cutting down on alcoholic beverages or late-night work.

Do not allow children, animals, etc., to enter the chemical spray- ing area.

Before spraying, please prepare fully by inspecting sprayer nozzles and checking for abnor- malities such as loose screws or spray hose connections, fuel leaks, defective or broken fluid gaskets, or damage to the carry- ing band.

PRECAUTIONS WHEN TRANSPORTING CHEMICALS

When transporting chemicals, please handle with care to ensure that there is no spillage of chemi- cals from torn bags, broken bottles, or loose stoppers.

Do not carry chemicals in the same container as food.

PRECAUTIONS WHEN TRANS- PORTING THE SPRAYER

Do not transport the sprayer while it has chemicals or fuel in the tank, as these could leak out as a re- sult of impact during transporta- tion.

When transporting in a vehicle, please use a rope or similar to fix the sprayer firmly to the cargo trailer in an upright position. Please do not transport by bicycle or motorbike, as this is danger- ous.

FUEL

To reduce the risk of fire and burn injury:Manual background WARNING

To reduce the risk of fire and burn injury:

a)Handle fuel with care. It is highly flammable.

b)Do not smoke while handing fuel.

c)Do not refuel a hot engine.

d)Do not refuel a running engine.

e)Avoid spilling fuel or oil. Always wipe unit dry before using.

f ) Move at least 10 ft. (3 meters) away from the fueling point be- fore starting engine.

g)Always store gasoline in a con- GB-7

G B

Page 7
Image 7
Zenoah MD6210M owner manual Precautions Before Spraying, Precautions When Transporting Chemicals, Fuel, For safe operation