MD6210M

5. For safe operation

a)When starting work, please pay all due consideration to the spray- ing time, wind direction, etc., to ensure that no noise disturbance or chemical hazard is caused to nearby residents, passers-by, farm crops, and so on.

b)Watch out for children, pets, open windows or freshly washed cars, and blow debris safely away.

c)Do not allow bystanders in work area.

While spraying please hold the pipe firmly at all times and be careful not to point the nozzle in the direction of people or animals.

d)Always check to be sure that no debris has been blown onto someone else’s property.

e)While spraying please be careful of the wind direction and always stand on the upwind side, to avoid spraying yourself with chemicals.

f)Never point a blower tube toward an open flame to avoid the possi- bility of igniting the unit, causing injury to yourself or damage to surroundings.

6.The machine must not be used while on a ladder or scaffolding.

7.Never put the machine down with the engine running unless you have it in clear sight.

8.Never to touch the spark plug or plug cord while the engine is in operation. Doing so may result in being subjected to an electrical shock.

9.Never to touch the muffler, spark plug, or other metallic parts of the engine or engine cover while the engine is in operation or immedi- ately after shutting down the en- gine. These metallic parts and en- gine cover reach high tempera- tures during operation and doing so could result in serious burns.

WARNING

The temperature of the machine may increase after stopping the engine. Especially never forget to cool down the engine before refu- eling the machine.

10.Should you begin to feel even slightly unwell while spraying,

consult a doctor immediately. When doing so, inform the doc- tor of the name of the chemical you were using, the conditions of use, etc.

11.In an emergency, pull up the lower portion of both strap buck- les to loosen the straps. Move yourself away from the unit.

12.After completing the work and tidying away chemicals and spraying tools, you should imme- diately take a bath or wash your hands, feet, face, etc. thoroughly with soap, as well as washing your mouth out.

13.You should change all clothes worn, including underwear, and wash them thoroughly. Clothes worn during spraying should not be worn again the following day.

14.After spraying, please limit your alcohol intake and rest thor- oughly by going to bed early. If you feel even slightly unwell, please see a doctor as soon as possible.

MAINTENANCE

1.In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular intervals.

2.Always be sure to turn off the en- gine and disconnect the spark plug before performing any main- tenance or checking procedures.

WARNING

The metallic parts and engine cover reach high temperatures immediately after stopping the engine.

3.Examine the machine at intervals for loose fasteners and rusted or damaged parts. Use special care around the fuel line, the muffler, and the ignition wiring.

4.All engine service except for those described in this manual should be performed by compe- tent service personnel. Improper service to the blower fan and muf- fler could cause a hazardous fail- ure.

5.When replacing the any other

GB-9

G B

Page 9
Image 9
Zenoah MD6210M owner manual Do not allow bystanders in work area, Maintenance