Zhone Technologies 08-01002-01 manual Elite Modem Requirements, Description

viiiAbout this document

Elite Modem Requirements

The Elite Modem has specific requirements. Please insure that all of the information and equipment is available prior to proceeding with the installation procedure. The requirements are as follows:

Requirement	Description
Elite Modem Service	Contact your local Internet service provider (ISP)
	and subscribe to high-speed Internet service.
	Your modem will not function until the common
	local exchange carrier activates the service.
Network Access	A 10Base-T Ethernet Card with a standard RJ-45
	connector must be installed and configured in
	your computer. Any computer (MAC, PC, UNIX
	workstation) that can run Windows 3.1 or OS5 or
	higher can be used with the Elite Modem.
Network Address	Internet Protocol (IP) address from your Internet
	service provider or corporate IS network
	administrator. Simply ask for the IP address
	requirements for your connection. Your Internet
	service provider must use TCP/IP protocol.
Only one Elite Modem per phone	The Elite Modem will not operate with multiple
line	computers. Only the computer that is directly
	connected to the Elite Modem through the
	10Base-T Ethernet cable is supported.
Elite Modem must be connected	Data transfer rates will vary somewhat,
to line one (1) on multiple line	depending on the speed of your computer, the
telephone systems	network (ISP, corporate, etc.) through which you
	are communicating, and the speed and
	connection of the computer with which you are
	transferring data.

If you need help, call distributor technical support.

Revision 2.01 Elite Modem Installation Guide 08-01002-01