![](/images/new-backgrounds/1118360/11836047x1.webp)
Installation
8Hang the unit from the wood screws to verify that the screws are properly placed. The screws should freely slide into the top of the key slots in the brackets.
Do not fasten the unit to the wall until after it is completely cabled and tested.
Installing the DSLAM on a Shelf or Desktop
If the DSLAM will be placed on a shelf or desktop, install the provided rubber feet before putting the unit in position.
To install the DSLAM on a shelf or desktop, as a standalone unit or in a stack:
1Locate the rubber feet in the hardware kit provided with the unit.
2Turn the unit upside down on a flat surface. Squares stamped into the bottom of the unit show the proper positions for the feet.
3Remove the protective sheet from the bottom of each foot, then press the foot onto a corner of the bottom of the unit.
4Turn the unit right side up and place it in position on a shelf or desktop.
5If the installation includes more than one unit, one can be stacked atop another. Up to eight units can be stacked together.
24 | 4929 DSLAM Installation and User’s Guide |