Zhone Technologies 4929 Disablewebserver, Enabletelnet, Enabletftp, Enablewebserver, Help, Logout

	CLI Commands
Table 3: CLI Commands (Sheet 2 of 2)
Command	Description
DISABLE_WEB_SERVER]	Disables access to the DSLAM using the web server.
ENABLE_TELNET	Enables access to the DSLAM using Telnet.
ENABLE_TFTP	Enables access to the DSLAM using Trivial File Transfer Protocol.
ENABLE_WEB_SERVER	Enables access to the DSLAM using the web server.
HELP	Lists available commands and their syntax.
LOGOUT	Ends the CLI session.
SET	Sets a configuration option. Most SET commands require that slot
	be specified, and allow port optionally to be specified. Exceptions
	are the two system SET commands for session timeout and system
	name.
	Syntax:
	set cli_session_timeout seconds
	set system_name name
	set slot 1 [[port] [all, port_number]] [item] [value]
	Items and values for SET commands are shown in Table 4, Set and
	Show Command Items and Values.
SHOW	Shows a configuration option. SHOW commands require that slot be
	specified, and allow port optionally to be specified.
	Syntax:
	show slot 1 [[port] [all, port_number]] [item] [value]
	Items and values for SHOW commands are shown in Table 4, Set
	and Show Command Items and Values.
WHO	Shows who is logged in the system.

The commands use the following parameters.

Table 4: Set and Show Command Items and Values (Sheet 1 of 3)

Items	Values
ADSL_ENCAPSULATION	[RFC1483-LLC,RFC1483-VCMUX]
ADSL_PORT_MODE	[ON,OFF,ADAPTIVE,FIXED_ADAPTIVE]
ADSL_SPEED	[XXXX YYYY]

Where:

XXXX= downstream rate (in kbps) and

YYYY= upstream rate (in kbps)

4929-A2-ZN20-30 4929 DSLAM Installation and User’s Guide 77