Configuration Using the NMS
MAC Rules
To configure MAC rules:
1Click on the MAC Rules tab. The MAC Rules screen appears.
2Select or enter the following parameters:
Parameter | Description |
|
|
Port | Select a port from the |
|
|
Reset the MAC rules to | Click in this box to reset MAC rules when the |
default parameters | Submit button is clicked on. |
|
|
Activate | Specify whether the rule is active. |
|
|
MAC Range | Specify the range of MAC addresses that |
| constitutes a match for this rule. |
|
|
Allow Tag/Untag on | Specify tag or untag. Tag indicates that ingress |
Ingress Pkt. | packets already matched to the MAC Rule must |
| have a VLAN tag to be further considered; |
| packets without a VLAN tag will be dropped. |
| Untag indicates that ingress packets already |
| matched to the MAC Rule cannot have a VLAN |
| tag to be further considered; packets with a |
| VLAN tag will be dropped. |
|
|
62 | 4929 DSLAM Installation and User’s Guide |
