Zhone Technologies 4929 DSLAM manual Installing the Dslam on a Wall

Installation

3Insert and tighten the screws in the top screw positions, then tighten the bottom screws.

48MA 1.24A X

PWR	+	MIM
		+

MIM2 T1/E1

LK ACT LK ACT

1 2	3	4	5	6	7	8	9			COM
								10	11 12
13 14	15 16		17 18 19 20								Lnk	SFP
							21	22			Act
									23 24
										10/10/1000	Dup

POTS

ADSL2+

4929

05-17616

Installing the DSLAM on a Wall

Wall mounting requires two wood screws suitable for the weight of the fully cabled unit. These are not included. Use at a minimum 1/4-inch (6 mm) diameter screws in 3/4-inch (19 mm) plywood (not drywall).

To install the DSLAM on a wall:

1Identify the flat-head screws provided in the hardware kit and the brackets suitable for a 23-inch rack. Two screws are required for each bracket.

2Lay the unit upside down on a flat surface.

3Locate the pair of threaded holes on the right side of the unit. Attach a bracket using the flat-head screws.

22 4929 DSLAM Installation and User’s Guide 4929-A2-ZN20-30