![](/images/new-backgrounds/1118360/118360157x1.webp)
CLI Commands
Table 4: Set and Show Command Items and Values (Sheet 3 of 3)
Items | Values |
|
|
MAC | [dump,clear] |
|
|
MGMT_PORT_UPLINK | [on,off] |
| Allows the PHYSICAL management port to be an UPLINK port. |
|
|
MIM | [dump,reset_stats] |
|
|
PHY | PHY DEBUG |
|
|
PRIORITY | |
|
|
PROTOCOL | [ALL,IP,VALUE] |
| Changes the protocol filter. |
|
|
RESET | None. |
|
|
SNMP_READONLY_COM- | None. You will be prompted for values. |
MUNITY |
|
|
|
SNMP_READWRITE_COM- | None. You will be prompted for values. |
MUNITY |
|
|
|
STATIC_MAC | xx:xx:xx:xx:xx:xx |
| Sets static mac addresses. |
|
|
SUBNET_MASK | xxx.xxx.xxx.xxx |
|
|
SUPERUSER_PASSWORD | None. You will be prompted for values. |
|
|
SYSTEM_NAME | [system_name] |
| Changes the DSLAM System Name and CLI Prompt. |
|
|
VLAN_RANGE | VLAN_RANGE: |
| SHOW: |
| SET: |
| VLAN_ID: |
|
|
| 4929 DSLAM Installation and User’s Guide | 79 |