![](/images/new-backgrounds/1118360/11836081x1.webp)
SNMP Configuration
SNMP Configuration
Use the SNMP Configuration screen to enable traps and establish trap managers.
To configure SNMP parameters:
1From the home screen, click on the SNMP Config button. The SNMP Configuration screen appears.
2Select or enter the following parameters:
Parameter | Description | |
|
| |
SNMP Notification IP | Specify the IP addresses of hosts that are to | |
| receive trap notifications. | |
|
| |
SNMP Traps | Click in the check boxes to enable or disable | |
| SNMP traps: | |
| z | snmpAuthentication |
| z | snmpEnvironment |
| z | snmpColdStart |
| z | snmpModule/Port |
|
|
|
3 Click on Submit.
| 4929 DSLAM Installation and User’s Guide | 41 |