U.S. Government Users. The Software is a "commercial item" as defined at 48 C.F.R. 2.101, consisting of "commercial computer software" and "commercial computer software documentation" as such terms are used in 48 C.F.R. 12.212. Under 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 to 227.7202-4, U.S. Government Users acquire the Software only with the rights set forth therein.

Third Party Licensors. This Zhone End User License Agreement may be accompanied by differing or additional provisions applicable to portions of the Software provided by one or more Licensors ("Licensor Provisions"). User acknowledges and agrees that its Use of such portions of the Software is subject to the Licensor Provisions.

! Important Safety Instructions

1.Read and follow all warning notices and instructions marked on the product or included in the manual.

2.This product is to be connected to a nominal –48 to –60 VDC supply source that is electrically isolated from the AC source using minimum 18 AWG (0.75mm² ) leads . Two inputs are provided for redundancy. The positive terminal of the DC source is to be reliably connected to earth. Connect a minimum 18 AWG (0.75mm² ) green/yellow earthing (grounding) wire to the protective earthing (grounding) screw, identified by the protective earth symbol on the back of the chassis.

3.This product may only be used in a Restricted Access Location in accordance with the requirements of the National Electric Code, ANSI/NFPA 70, and the Canadian Electrical Code, or in accordance with the standards and regulatory requirements of the country in which it is installed. A Restricted Access Location is a secure area (dedicated equipment rooms, equipment closets, or the like) for equipment where access can only be gained by service personnel or by users who have been instructed about the reasons for the restrictions applied to the location and about any precautions that must be taken. In addition, access into this designated secured area is possible only through the use of a tool or lock and key, or other means of security, and is controlled by the authority responsible for the location.

4.A readily accessible disconnect device as part of the building installation shall be incorporated in fixed wiring. The DC disconnect device must be rated at a minimum

60 VDC, minimum 2A. The disconnect device shall be readily accessible to the operator. The disconnect device must be included with an adequately rated fuse or circuit breaker in the ungrounded conductor. Use a minimum 18 AWG (0.75 mm²) fixed power source wires with strain retention.

5.Do not allow anything to rest on the power cord and do not locate the product where persons will walk on the power cord.

6.Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these slots and openings must not be blocked or covered.

7.Do not attempt to service this product yourself, as it will void the warranty. Opening or removing covers may expose you to dangerous high voltage points or other risks. Refer all servicing to qualified service personnel.

8.A rare phenomenon can create a voltage potential between the earth grounds of two or more buildings. If products installed in separate buildings are interconnected, the voltage potential may cause a hazardous condition. Consult a qualified electrical consultant to determine whether or not this phenomenon exists and, if necessary, implement corrective action prior to interconnecting the products.

9.CLASS 1 LASER PRODUCT: This product has provisions for the customer to install a Class 1 laser transceiver, which provides optical coupling to the telecommunication network. Once a Class 1 laser product is installed, the equipment is to be considered to be a Class 1 Laser Product (Appareil à Laser de Classe 1). The customer is responsible for selecting and installing the laser transceiver and for insuring that the Class 1 AEL (Allowable Emission Limit) per EN/IEC 60825 is not exceeded after the laser

44929 DSLAM Installation and User’s Guide

Page 3 Page 5
Page 4
Image 4
Zhone Technologies 4929 DSLAM manual Important Safety Instructions
Page 3 Page 5

4929, 4929 DSLAM specifications

Zhone Technologies, a leading provider of innovative networking and communications equipment, has garnered attention for its advanced digital subscriber line access multiplexer (DSLAM), the Zhone 4929. This model is designed to meet the growing demand for high-speed broadband access in a variety of environments, making it a vital component in modern telecommunications networks.

One of the primary features of the Zhone 4929 DSLAM is its ability to support multiple DSL standards, including ADSL, ADSL2, ADSL2+, and VDSL2. This versatility enables service providers to efficiently manage a diverse range of customer demands and to optimize bandwidth allocation across various service tiers. The ability to support both asymmetric and symmetric DSL technologies allows operators to cater to different business and residential requirements while maintaining service quality.

The Zhone 4929 is equipped with advanced hardware that supports high-density deployments, allowing network operators to maximize their investment in infrastructure. With support for up to 384 DSL lines in a single chassis, this DSLAM can easily scale to accommodate growing subscriber bases. This flexibility is essential for service providers aiming to expand their coverage and reach without significantly increasing operational costs.

Another notable characteristic of the 4929 is its robust management capabilities. It features an intuitive management interface that simplifies the monitoring and configuration of the device, enabling operators to efficiently manage their networks. With real-time performance monitoring and diagnostic tools, service providers can quickly identify and resolve issues, ensuring a high-quality end-user experience.

Power efficiency is also a key aspect of the Zhone 4929 design. The DSLAM employs energy-efficient technologies that reduce overall power consumption, making it not only environmentally friendly but also cost-effective during operation. This is particularly important in an era where operational costs and sustainability concerns are at the forefront of industry challenges.

Moreover, the Zhone 4929 is designed with future-proofing in mind. Its modular architecture allows for easy upgrades and expansions, meaning that service providers can adapt to new technologies and standards as they emerge, protecting their investments over time.

In conclusion, the Zhone Technologies 4929 DSLAM is a powerful solution for enhancing broadband access. Its support for multiple DSL technologies, high-density capabilities, robust management tools, energy efficiency, and future-proof design make it an essential component for any service provider looking to deliver high-speed internet access in today's fast-paced digital world.
Top Page Image Contents