Advanced Setup
!
!
Bitswap Enable
SRA (Seamless Rate Adaptation) Enable
Do not change these settings unless so directed by your ISP.
DSL Advanced Settings
Do not change the DSL Advanced Settings unless so directed by your ISP. To view the DSL Advanced Settings screen, click on the Advanced Settings button on the DSL Settings screen (see Figure 64).
There are five test modes between the router and your ISP:
!
!
!
!
!
Normal test: Puts the router in a test mode in which it only sends a Normal signal.
Reverb test: Puts the router in a test mode in which it only sends a Reverb signal.
Medley test: Puts the router in a test mode in which it only sends a Medley signal.
No Retrain: In this mode the router will try to establish a connection as in normal mode, but once the connection is up it will not retrain if the signal is lost.
L3: Puts the router into the L3 power state.
Figure 65: DSL Advanced Settings
74
