|
| Installing the USB Driver | |
Table 3: | LED Indicators (Sheet 2 of 2) | ||
|
| ||
This LED . . . | Should be: | ||
|
|
|
|
LAN |
| Solid green to indicate that the device can communicate | |
|
| with your PC via Ethernet, or flashing when the router is | |
|
| sending or receiving data over Ethernet. | |
|
|
|
|
USB |
| Solid green when connected, flashing when the router is | |
|
| sending or receiving data. | |
|
|
|
|
If the LEDs are illuminated as expected, the router is working properly.
Installing the USB Driver
The following section applies only if you use the USB connector on the router. If you connect the USB cable between your PC and the router, Windows detects the new hardware and the Found New Hardware Wizard appears on your PC monitor. Follow this procedure:
1Choose "Install from a list or specific location" from the Wizard's menu, then click on Next.
Figure 4: Found New Hardware Wizard
| 19 |
