
To configure your ADSL Bridge modem to use a static IP address
1 Before you can access the modem’s interface, you must first change your computer’s TCP/IP settings to match the values show in the table below.
For this value… | Enter… |
IP address | Any value between 10.0.0.4 and |
| 10.0.0.20. For example, type 10.0.0.10. |
Subnet mask | 255.255.255.0 |
Default gateway | 10.0.0.2 |
Tip!
If do not know how to access your computer’s TCP/IP settings, see Chapter 3: Specifying TCP/IP Settings on page 15.
2 Log into the Zoom Configuration Manager.
aOpen your Web browser and, in its address bar, type http://10.0.0.2, then press the Enter key on your keyboard. (You do not need to have an Internet connection established to be able to view the interface.)
Tip!
If you are using a Windows computer, a Zoom icon should have been placed on your desktop when you installed the software provided with the modem. Instead of typing one of the addresses above in your Web browser, you can
bWhen prompted, type the following user name and password in the appropriate boxes, then click OK. You must enter them using lowercase letters.
User Name: admin
Password: zoomadsl
Chapter 2: Using Static IP Addressing | 13 |