3 From the Reboot Mode drop-down list, select Reboot From Default Configuration.

4 Click the Reboot button. Once this process is complete, your unit is reset to its factory settings.

To perform a hard reset

If you lose your link to the unit and cannot communicate with it via the Web browser, do the following to perform a hard reset:

1 Insert a paper clip into the RESET pinhole in the center of the modem’s back panel.

2 Hold it there for five seconds. The unit’s LINK light will turn off and then it will blink slowly, about once per second.

You are now guaranteed that all system settings are restored to the modem’s factory defaults.

Chapter 5: Advanced Setup Options

35