5 When the installation is complete, click Finish, then click
Exit.
6 Close any applications that may be open, then remove the CD from the
7 Shut down the computer.
Congratulations! You have installed the software. Now, continue with the next section, Installing the Hardware.
Step 2: Installing the Hardware
1 Shut down your computer (if it is not shut down already).
2 Plug one end of the supplied phone cord into the modem’s ADSL port and the other into the ADSL wall jack.
3
4
Connect the modem to the computer’s Ethernet port. Plug one end of the Ethernet cable into the modem’s ETHERNET port and plug the other end into your computer’s Ethernet port.
The connection is made to the back panel of the modem.
Plug the included power cube into a power strip or wall outlet and then into the modem’s power (PWR) jack.
Important!
Only use the power cube shipped with the modem. Other power cubes may damage your hardware.
Chapter 1: Installation Instructions | 7 |