To access the Web interface of your ADSL Bridge modem
1 Before you can access the modem’s interface, you must first change your computer’s TCP/IP settings to match the values show in the table below. Be sure to make note of your computer’s current TCP/IP settings before changing them. How you access these settings and their names may vary depending on whether you are using a Windows, Macintosh, or Linux computer (for example, Gateway is called Router or Router Address on Macintosh computers).
For this value… | Enter… |
IP address | Any value between 10.0.0.4 and |
| 10.0.0.20. For example, type 10.0.0.10. |
Subnet mask | 255.255.255.0 |
Default gateway | 10.0.0.2 |
Tip!
If do not know how to access your computer’s TCP/IP settings, see Chapter 3: Setting TCP/IP Settings on page 15.
2 Log in to the Zoom Configuration Manager:
aOpen your Web browser and, in its address bar, type http://10.0.0.2, then press the Enter key on your keyboard. (You do not need to have an Internet connection established to be able to view the interface.)
Tip!
If you are using a Windows computer, a Zoom icon should have been placed on your desktop when you installed the software provided with the modem. Instead of typing one of the addresses above in your Web browser, you can
Chapter 4: Status Monitoring | 27 |