Windows 2000

1 Open the Internet Protocol (TCP/IP) Properties dialog box.

aFrom the desktop, click the Start button, point to Settings, then Network and Dial-up Connections.

bRight-click the Local Area Connection icon, and select Properties.

cSelect your NIC card’s TCP/IP entry (it should include “TCP/IP” in it, but not “AOL,” “Dial-up,” or “Adapter”) and click the Properties button.

2 Ensure the following is selected, depending on your situation:

!If you are logging into the Zoom Configuration Manager: Ensure that Use the following IP address and Use the following DNS server addresses are selected and that the information in the table below appears in the appropriate fields.

For this value…

Enter…

IP Address

Any value between 10.0.0.4 and 10.0.0.20.

 

For example, type 10.0.0.10.

Subnet mask

255.255.255.0

Default gateway

10.0.0.2

!If you are using dynamic IP addressing (DHCP): Ensure that Obtain an IP address automatically is selected and that either Obtain a DNS server address automatically or Enable DNS is selected. All fields should be blank.

!If you are using a static IP address: Ensure that Use the following IP address and Use the following DNS server addresses are selected. Enter the IP address, Subnet mask, Default gateway, and Preferred DNS server values given to you by your service provider.

24

ADSL Bridge Modem User’s Guide