Zoom Dialer 27 manual # 0 # 1 8 8 8 5 5 5 3 3 3 3 #, 1 # * 4 # #, # 1 # 0 1 2 3 4 5 6 7 8 9 #

Suppose you want to program your dialer to call a server, wait for a voice prompt, and then deliver an identifying string followed by a pound sign. Suppose the server's phone number is 1 888 555-3333, and the ID string is 0123456789#. You could program the dialer to do this as follows:

1.Take your phone off-hook

2. Enter # 0 # 1 8 8 8 5 5 5 3 3 3 3 #

3.Listen for two confirmation beeps

4.Place your phone on-hook

5.Take your phone off-hook

6. Enter 1 # * 4 # #

7.Listen for two confirmation beeps

8.Place your phone on-hook

9.Take your phone off-hook

10. Enter # 1 # 0 1 2 3 4 5 6 7 8 9 #

11.Listen for two confirmation beeps

12.Place your phone on-hook

13.Take your phone off-hook

14. Enter # * 0 # # #

15.Listen for two confirmation beeps

16.Place your phone on-hook

Note: The maximum total number of characters in a dialer string is 96. For each number, count the number of DTMF digits in the number plus one. The *2, *4, and *5 instructions each count as three characters, the

*0 n instruction counts as 4 characters, and the *1 PPP instruction counts as 6 characters. For the above examples, the total number of characters are 26 and 30, respectively.

8 Hotline Dialer Installation & User Guide