Manuals / Zoom / Household Appliance / Home Security System

Zoom Dialer 27 manual Dialer LED Definitions, LED Pattern, Meaning

Models: Dialer 27

1 24

Page 23

Dialer LED Definitions

The dialer's LED provides useful information about the dialer and the line it's connected to. This table shows the LED's blinking patterns and what they mean.

Note: If dialer LED is on solidly, plug the short dialer phone cord into the dialer's other jack.

LED Pattern

OFF

Meaning

When the LED is ON solidly, it indicates that the dialer's short phone cord is plugged into the wrong dialer jack. Please plug this short phone cord into the dialer's other jack.

The dialer is OFF-HOOK. This is usually because someone is using a phone or a modem or fax. The LED will also be OFF if the dialer has no power.

One Blink Every Second:		This pattern of one blink per second indicates
¤ ¤ ¤ ¤ ¤ ¤ ¤		that the line is ON-HOOK. The dialer is ready.
Repeats Continuously
Other Blinking Patterns		The dialer will blink in other patterns when first
¤ ¤¤¤	¤¤	powered up and while routing calls. This is
		normal.

Dialer LED Definitions

Page 23

Image 23

Zoom Dialer 27 manual Dialer LED Definitions, LED Pattern, Meaning

Contents

for Hotline and/or Toll Restriction Installation & User GuideDialer Copyright 2004 All rights reserved SETTING UP THE DIALER AS A TOLL RESTRICTOR ContentsINSTALLING THE DIALER SETTING UP THE DIALER AS A HOTLINEPage Getting Started Installing the DialerGetting Started How Dialer 27 WorksDialer Cord short Phone Jack Power CubeHotline Dialer Installation & User Guide DialerProgramming a Hotline Phone Number Setting Up the Dialer as a HotlineN seconds after coming off-hook, where N is from 1 to Setting Up the DialerPage Setting Up the Dialer Setting a PasswordHotline Security 3. Enter the first Instruction or Number Advanced Hotline Number ProgrammingUniversal Call Blocking 2. Enter # * 2last at least 2.4 seconds List of Instructions for Dialer Strings1 PPP 99.9 seconds# * 0 # # # # 0 # 1 8 8 8 5 5 5 3 3 3 3 #1 # * 4 # # # 1 # 0 1 2 3 4 5 6 7 8 9 #Set the Domestic Toll Length Setting Up the Dialer as a Toll RestrictorSettings Set Toll Restriction Set the Domestic Toll PrefixSet the International Toll Prefix Examples Allow Some Calls Within a Restricted AreaSettings Examplesfirst tones same as other tones default SettingsDialer Tone Settings for MEDIUM tones nominally -6dBm defaultFrequently Asked Questions Using the DialerUsing the Dialer in Hotline Mode Using the Dialer in Toll Restrictor ModeIn most configurations, many calls are never restricted, such as local calls that dont start with a 1. The dialer typically lets the digits dialed for these calls go directly to the central telephone office Q When should I consider having the dialer generate longer or louder Frequently Asked QuestionsQ Why doesnt my dialer work? Q Why doesnt the dialer dial my hotline number?Q How can I make the dialer tones quieter? Q I have two phone lines wired into one jack. How do I attach theQ How do I connect the dialer when all of the phone jacks in my house Q I forgot the dialers password. How can I reprogram the dialer?Q I set a number to be restricted, and then changed it to be allowed To remove the restricted sequence 1, enter # 9 2 1 * * * * * * 9 # #To remove the allowed sequence 1 415, enter # 9 2 1 4 1 5 * * * 7 # # # 9 2 1 501 555 8 # #To Change Dialing Speed or Dialing Volume Command SummaryTo Set Up a Trigger and Hotline Number To Set Security FeaturesDialer LED Definitions Dialer LED DefinitionsLED Pattern Meaning2004 0364-A27308