Zoom HD16, HD8 TOTAL, Wet, Rec Signal, tandard -A-, Patch Level=25, tandard -A-, Rec Signal, Wet

Reference [Effects]

ZOOM HD8/HD16 133

2. Press the [EDIT] key.

The currently selected patch can be edited.

3. Use the cursor left/right keys to bring up the

indication “TOTAL” on the ﬁrst line and the

indication “Patch Level” on the second line of

the display.

4. Repeatedly press the cursor down key to

bring up the indication “Patch Name” on the

ﬁrst line of the display.

The name of the selected patch can now be edited. A cursor

(ﬂashing square) indicates the character that can be changed.

5. Use the cursor left/right keys to move the

cursor to the character you want to change,

and turn the dial or use the pads/keys of the

pad section to select a character.

For details on entering characters, see page 37.

6. To conﬁrm the new name, do the store

operation. (For details on store operation,

see page 132.).

The patch is stored (overwritten) with the new name, and the

insert effect patch select screen appears again.

NOTE

Keep in mind that the name will revert to the previous name if

you switch to another patch without storing the edited patch

name.

Normally, when the insert effect is applied to the input mixer,

the signal processed by the effect will be recorded on the track.

If necessary, however, you can apply the insert effect only to

the monitor signal, and record the unprocessed input signal on

the track. For example when recording the unprocessed sound

of a vocal performance, the vocalist will be more comfortable

singing if an insert effect suitable for mic recording is applied

to the monitor signal.

1. Set the insert effect position to the input

mixer.

2. At the main screen, press the [PROJECT/

UTILITY] key.

The indication “REC UTILITY” appears on the ﬁrst line and

the indication “PROJECT” on the second line of the display.

3. Use the cursor left/right keys to bring up the

indication “REC SIGNAL” on the display, and

press the [ENTER] key.

The current setting value is shown.

You can now select one of the following two signal types to be

recorded on the track.

●Wet

The input signal that has passed through the insert effect

will be recorded on the track (default setting).

●Dry

Only the unprocessed input signal will be recorded on the

track. Even in this case, however, the insert effect will be

applied to the monitor signal appearing at the MASTER

OUT jacks.

4. Turn the dial to change the setting to “Dry”.

5. When you have ﬁnished adjusting settings,

press the [EXIT] key several times.

The unit returns to the main screen.

HINT

The setting is stored for each project. If required, change the

setting back to “Wet” before you begin recording other parts.

Applying the insert effect only to

the monitor signal

TOTAL

Patch Level=25

Patch Name

±tandard -A-

tandard -A-

INPUT

Insert effect

Recorder

REC UTILITY 1/10

>PROJECT

Rec Signal

Wet