Zoom HD16, HD8 Project Name, Project Protect, PRJ003 -A-, Project Protect, 00 000:00:000

Reference [Projects]

ZOOM HD8/HD16 153

display.

3. Press the [ENTER] key to erase the project.

When erasing is completed, press the [EXIT] key to return to

the main screen.

NOTE

•Once a project has been erased, it cannot be recovered. Use this

operation with care.

•A project for which protect is On cannot be erased. Set protect

to Off and then repeat the procedure.

• If you erase the project that is currently loaded, the lowest-

numbered project will automatically be loaded after the erase

operation has been completed.

This operation lets you edit the name of the currently loaded

project.

1. Refer to steps 1 – 3 of “Basic procedure” to

bring up the indication “NAME” on the

second line of the display. Then press the

[ENTER] key.

The current project name is shown on the display.

2. To edit the name, use the cursor left/right

keys to move the cursor (ﬂashing part) to the

character you want to change, and turn the

dial or use the pads/keys of the pad section

to select a character.

For details on the entry procedure and available characters, see

page 37. To return to the main screen after editing the name,

press the [EXIT] key several times.

This operation lets you write-protect the currently loaded

project, which disables project storing and editing. When

protect is On, the following operations will be not be possible.

• Erasing a project

• Editing or recording on the recorder

• Changing the V-take

• Editing a patch (including module on/off)

•Recording or editing a rhythm pattern or rhythm

song

•Saving/deleting scenes, making marker settings,

etc.

•Creating a phrase loop

•Creating/editing a drum kit

1. Refer to steps 1 – 3 of “Basic procedure” to

bring up the indication “PROTECT” on the

second line of the display. Then press the

[ENTER] key.

The screen for setting the protect status to On/Off is shown on

the display.

2. Turn the dial to select “On” (protect enabled)

or “Off” (protect disabled).

When a project is loaded for which protect is On, a lock

symbol is shown in the top right of the display.

NOTE

•A project that is not protected will be automatically saved when

power is turned off or when another project is loaded. If you have

ﬁnished a song, we recommend to turn protect On. This will

prevent inadvertently saving changes caused by operation steps

that you have taken after ﬁnishing the song.

•A change in the protect On/Off setting becomes active

immediately. To return to the main screen after making the

setting, press the [EXIT] key several times.

Changing the project name

Protecting a project

Project Name

PRJ003 -A-

Project Protect

Off

Lock symbol

PRJ 0 PRJ000

≤ Ó00 000:00:000

00 000:00:000