Reference [Effects]
ZOOM HD8/HD16 137
5. Turn the dial to select the import source
project, and press the [ENTER] key.
The subsequent steps differ, depending on which selection was
made in step 3.
When “ALL” was selected
Verify that the indication “Import?” is shown on the display
and proceed to step 6.
When “PATCH” was selected
The import source patch appears on the display. When you
turn the dial to select the patch and press the [ENTER] key,
the import target patch selected in step 1 is shown. If
necessary, turn the dial to select the number of the patch to
use as import target, and press the [ENTER] key. The
indication “Import?” appears on the display.
6. To carry out the import process, press the
[ENTER] key.
All patches or the specified patch of the selected project will be
imported. When all patches were imported, the insert effect or
send/return effect select screen appears again. When a single
patch was imported, the display of step 4 appears again.
By pressing the [EXIT] key instead of the [ENTER] key, you
can cancel the operation and back up one step at a time.
Import
Import
No.1:PRJ001
No.1:PRJ001
Project nameProject number