Zoom HD16, HD8 V-Take Name, TR 1- 1 -A-, TR 1- 1 -A-

Reference [Recorder]

ZOOM HD8/HD16 37

• LINxx-yy

V-take recorded through LINE algorithm of insert effect

• 8INxx-yy << only>>

V-take recorded through 8x COMP EQ algorithm of insert

effect

• MASxx-yy

V-take recorded through MASTERING algorithm of insert

effect

• BYPxx-yy

V-take recorded without passing through insert effect

• BOUxx-yy

V-take recorded using the bounce function or rhythm

recording function

• LPxx_yy

Phrase written to V-take using the phrase loop function (→

p. 67)

HINT

When the phrase loop function is used to write a phrase to the

master track, the name “LP_MS_yy” is assigned.

• HRMxx-yy

V-take recorded using the harmony generate function or duo

harmony function.

To change a V-take name, proceed as follows.

1. From the main screen, press the [TRACK

PARAMETER] key in the control section.

2. Use the cursor up/down keys to bring up the

indication “Trackxx-yy” on the ﬁrst line of the

display (where xx is the track number and yy

is the V-take number).

The V-take name is shown on the second line of the display.

NOTE

Only the name of the V-take currently selected for a track can

be changed.

3. Use the cursor left/right keys or the status

keys to select the track for which to change

the V-take name.

NOTE

The name of a V-take on which nothing is recorded (“No Data”)

cannot be edited.

4. Press the [EDIT] key.

The cursor (ﬂashing box) appears on the ﬁrst character of the

V-take name. This indicates that you can change the V-take

name.

5. Use the cursor left/right keys to move the

cursor to the character to change, and use

the dial or the pads and keys in the pad

section to select the character.

During character input, you can use the cursor left/right keys

to move the input position.Characters can be input either by

turning the dial or pressing the pads and keys of the pad

section, as described below.

●Deleting a character

Move the cursor to the character to delete, and press the

[EDIT] key. The character is deleted and subsequent

characters move one position to the left.

●Entering a character with the dial

The dial changes the character under the cursor. Turn the

dial until the desired character is shown. The following

characters can be selected.

Numerals: 0 – 9

Letters: A – Z, a – z

Symbols: (space) ! “ # $ % & ` ( ) ✽ + , – . / : ; < > = ? @

[ ] ^ _ ` { } |

HINT

The method for character input is the same also when

assigning a name to elements other than V-takes. However, for

samples saved on the hard disk, kit ﬁle names, and backup

folder names, the only characters that can be used are 0 – 9, A

– Z, and _ (underscore character).

●Entering a character with the pad section pads

and keys

Move the cursor to the input position and repeatedly press

the respective pad or key to enter a numeral, letter, or

symbol. The pad/key assignments are shown below.

Cursor

V-Take Name

±TR 1- 1 -A-

TR 1- 1 -A-

!?@&

PQRSpqrs

MNOmno

GHIghi

BCabc

JKLjkl

TUVtuv

x+( )

WXYZwxyz

DEFdef