Zoom HD16, HD8 Adjusting the signal for each track (track parameters)

Reference [Mixer]

ZOOM HD8/HD16 79

●No track selected as recording track

NOTE

•The diagrams above show the signal ﬂow when the insert effect

has not been inserted into the input mixer. When the insert effect

is inserted, the signal ﬂow will change, depending on the number

of input and output channels of the effect (→ p. 128).

•<< only>> In 8-track recording mode (→ p. 46), the

signals from inputs 1 – 8 are sent to tracks 1 – 8.

HINT

• When no recording track is selected, the input signals are sent

directly to the [MASTER] fader. The pan controls of the input

mixer can be used to adjust the panning value of the signal sent

to the [MASTER] fader. (When a recording track is selected, the

pan setting of the input mixer has no effect on the signal.)

• By using the bounce function, you can apply the send/return

effect to the input signal for recording (→ p. 44).

The input mixer and track mixer let you adjust various aspects

for each track (called track parameters), such as panning and

send/return effect intensity. This can be done for each track

individually.

This section describes how to adjust track parameters.

NOTE

For stereo tracks and the drum track, parameter settings except phase and V-take number (audio tracks only) are linked for the L/R channels.

HINT

The parameter knobs above the faders let you quickly adjust

main parameters for a track (→ p. 81).

1. From the main screen, press the [TRACK

PARAMETER] key in the control section.

The ﬁrst line of the display shows the track/input and the

second line shows the name of the parameter that is being

adjusted.

2. Use the cursor left/right keys to select the

track/input.

You can also use the status keys to select a track.

HINT

• When switching the V-take of a stereo track, each push of the

key toggles between the odd-numbered and even-numbered

track.

• When selecting the drum/bass track with the [RHYTHM] status

key, each push of the key toggles the target track. This also

changes the track that can be controlled with the pad and fader.

•<< only>> In 8-track recording mode, eight inputs can be

used simultaneously. In this case, you can select the input with

the respective [ON/OFF] key and adjust track parameters for

each input (except for the record level). The display will show the

number of the input (INPUT 1, INPUT 7, etc.).

Track mixer

ON/OFF

[MASTER] fader

only (8-track recording enabled)

Input with lower

number L

Input with higher

number R

OUTPUT

PAN

PAN(BALANCE)

INPUT 1

INPUT 2

OUTPUT

PAN

INPUT 1

INPUT 2

Adjusting the signal for each track (track parameters)

Adjusting a track parameter

Track1

EQ HI G=0dB

Parameter name Track/input

Track2

EQ HI G=0dB