Zoom ST-224 Getting Connected, Connections to Playback Equipment and MIDI Equipment, Connection to Sound Source (1) (CD Player)

Getting Connected

Connections to Playback Equipment and MIDI Equipment

Connected Getting

				Data card (option)		AC Adapter
HeadPhones		PHONES						DC INPUT
	ZOOM CORPORATION MODEL						300mA
	MADE IN JAPAN
LINE/MIC R	L/MONO	PHONES	R	L/ MONO	DATA CARD	MIDI IN	DC9V	POWER
INPUT			OUTPUT
	OUTPUT R			OUTPUT L/MONO		MIDI IN
								When wishing to synchronize
								the operation of the ST-224
								with an external sequencer or
								control the sound of the ST-
For mono playback, only the								224 sound from external
								MIDI equipment, connect the
[OUTPUT L/MONO] jack
								MIDI OUT jack of the
needs to be connected.
								external equipment to the
								[MIDI IN] jack of the ST-224,
								using a MIDI cable.
		Playback equipment			MIDI OUT jack of MIDI sequencer or computer
(mixer, audio system, radiocassette player, etc.)					with MIDI interface

Connection to Sound Source (1) (CD Player)

When sampling a stereo source, connect the [INPUT L/MONO]
jack and the [INPUT R] jack to the source. For mono sampling,
only the [INPUT L/MONO] jack needs to be connected. It is
also possible to mix a stereo source internally and perform
mono sampling ( ➔ p. 21).					L/MONO	R	MIC/LINE
						INPUT
							INPUT
CD Player							MIN	MAX
					[INPUT] knob			PEAK
INPUT R	INPUT L/MONO				[INPUT PEAK] LED
	ZOOM CORPORATION MODEL				Adjust the [INPUT] knob so that
	IN JAPAN					300mA
					the [INPUT PEAK] LED on the
					front panel lights up during the
LINE/MIC R	L/MONO	PHONES	R L/MONO	DATA CARD	loudest passages of the music.
					MIDI IN	DC9V	POWER
INPUT			OUTPUT

To sample a signal from equipment with line-level output such as a CD

LINE/MIC player, set the [LINE/MIC] switch to the "LINE" position.

8