ZyXEL Communications 2602HWL-DXA - page 100

Prestige 2602HWL-DxA Support Notes
All contents copyright (c) 2005 ZyXEL Communications Corporation. 100
not knowing what your MAC address is, please enter a command "ipconfig /all" after DOS prompt to get the
MAC (physical) address of your wireless client.
If you use SMT management, the MAC Address Filter configuration are as shown below.
Enter the MAC Addresses of wireless cards in the filter set to allow or deny association from these cards.
Menu 3.5.1 - WLAN MAC Address Filter
Active= Yes
Filter Action= Allowed Association
------------------------------------------------------------------------------
1= 11:11:11:11:11:11 13= 00:00:00:00:00:00 25= 00:00:00:00:00:00
2= 00:00:00:00:00:00 14= 00:00:00:00:00:00 26= 00:00:00:00:00:00
3= 00:00:00:00:00:00 15= 00:00:00:00:00:00 27= 00:00:00:00:00:00
4= 00:00:00:00:00:00 16= 00:00:00:00:00:00 28= 00:00:00:00:00:00
5= 00:00:00:00:00:00 17= 00:00:00:00:00:00 29= 00:00:00:00:00:00
6= 00:00:00:00:00:00 18= 00:00:00:00:00:00 30= 00:00:00:00:00:00
7= 00:00:00:00:00:00 19= 00:00:00:00:00:00 31= 00:00:00:00:00:00
8= 00:00:00:00:00:00 20= 00:00:00:00:00:00 32= 00:00:00:00:00:00
9= 00:00:00:00:00:00 21= 00:00:00:00:00:00
10= 00:00:00:00:00:00 22= 00:00:00:00:00:00
11= 00:00:00:00:00:00 23= 00:00:00:00:00:00
12= 00:00:00:00:00:00 24= 00:00:00:00:00:00
------------------------------------------------------------------------------
Enter here to CONFIRM or ESC to CANCEL:
Key Settings:
Option Descriptions
Filter Action
Allow or block association from MAC addresses contained in this list. If Allow Association
is selected in this field, hosts with MAC addresses configured in this list will be allowed to
associate with AP. If Deny Association is selected in this field, hosts with MAC addresses
configured in this list will be blocked.