ZyXEL Communications 2602HWL-DXA manual Menu 3.1 General Ethernet Setup Input Filter Sets

Prestige 2602HWL-DxA Support Notes

•Action Matched=

Enter the action you want if the masked packet matches the 'Value'. In this case, we will drop it.

•Action Not Matched=

Enter the action you want if the masked packet does not match the 'Value'. In this case, we will forward it. If you want to configure more rules please select 'Check Next Rule' to start configuring the next new rule. However, please note that the 'Filter Type' must be also 'Generic Filter Rule' but not others. Because the Generic and TCPIP (IPX) filter rules must be in different filter sets.

Menu 21.1.2 - Generic Filter Rule

Filter #: 1,2

Filter Type= Generic Filter Rule

Active= Yes

Offset= 6

Length= 6

Mask= ffffffffffff

Value= 0080c810234a

More= NoLog= None

Action Matched= Drop

Action Not Matched= Forward

You can now apply it to the 'General Ethernet Setup' in Menu 3.1. Please note that the 'Generic Filter' can only be applied to the 'Device Filter' but not the 'Protocol Filter' that is used for configuring the TCPIP and IPX filters.

Menu 3.1 - General Ethernet Setup

Input Filter Sets:

protocol filters= device filters= 1

Output Filter Sets: protocol filters= device filters=

56

All contents copyright (c) 2005 ZyXEL Communications Corporation.