ZyXEL Communications 2602HWL-DXA manual Following table describes the fields in this screen

Prestige 2602HWL-DxA Support Notes

Local IP:

Start=		0.0.0.0
End	=	N/A
Global IP:
Start=		0.0.0.0
End	=	N/A

Press ENTER to Confirm or ESC to Cancel:

The following table describes the fields in this screen.

Field		Description	Option/Example
			One-to-One
		Press [SPACEBAR] to toggle through a total of 5 types. These	Many-to-One
			Many-to-Many Overload
Type		are the mapping types discussed above plus a server type. Some	Many-to-Many	No
		examples follow to clarify these a little more.	Overload
			Server
	Start	This is the starting local IP address (ILA)	0.0.0.0
Local
		This is the ending local IP address (ILA). If the rule is for all
IP	End	local IPs, then put the Start IP as 0.0.0.0 and the End IP as	255.255.255.255
		255.255.255.255. This field is N/A for One-to-Onetype.
	Start	This is the starting global IP address (IGA). If you have a	0.0.0.0
Global		dynamic IP, enter 0.0.0.0 as the Global Start IP.
IP
	End	This is the ending global IP address (IGA). This field is N/A for	200.1.1.64
		One-to-One,Many-to-One and Server types.

Note: For all Local and Global IPs, the End IP address must begin after the IP Start address, i.e., you cannot have an End IP address beginning before the Start IP address.

•NAT Server Sets

29

All contents copyright (c) 2005 ZyXEL Communications Corporation.