Prestige 2602HWL-DxA Support Notes

Check Mechanism = DSL Link

Check WAN IP Address1 = 0.0.0.0

Check WAN IP Address2 = 0.0.0.0

Check WAN IP Address3 = 0.0.0.0

 

 

KeepAlive Fail Tolerance = 5

 

 

Recovery Interval(sec) = 60

 

 

ICMP Timeout(sec) = 0

 

 

Traffic Redirect = Yes

 

 

 

 

Key Settings:

 

 

 

 

 

 

 

Label

Description

 

 

 

 

 

 

Backup

Select the method that the Prestige uses to check the DSL connection.

 

 

Type

 

 

 

 

Select DSL Link to have the Prestige check if the connection to the DSLAM is up. Select ICMP to have the

 

 

 

Prestige periodically ping the IP addresses configured in the Check WAN IP Address fields.

 

 

 

 

 

 

Check

Configure this field to test your Prestige's WAN accessibility. Type the IP address of a reliable nearby

 

 

WAN IP

computer (for example, your ISP's DNS server address).

 

 

Address1-3

 

 

 

 

If you select ICMP in the Backup Type field, you must configure at least one IP address here.

 

 

 

When using a WAN backup connection, the Prestige periodically pings the addresses configured here and

 

 

 

uses the other WAN backup connection (if configured) if there is no response.

 

 

 

 

 

 

Fail

Type the number of times (2 recommended) that your Prestige may ping the IP addresses configured in the

 

 

Tolerance

Check WAN IP Address fields without getting a response before switching to a WAN backup connection (or

 

 

 

a different WAN backup connection).

 

 

 

 

 

 

Recovery

When the Prestige is using a lower priority connection (usually a WAN backup connection), it periodically

 

 

Interval

checks to whether or not it can use a higher priority connection.

 

 

 

Type the number of seconds (30 recommended) for the Prestige to wait between checks. Allow more time if

 

 

 

your destination IP address handles lots of traffic.

 

 

 

 

 

 

Timeout

Type the number of seconds (3 recommended) for your Prestige to wait for a ping response from one of the

 

 

 

IP addresses in the Check WAN IP Address fields before timing out the request. The WAN connection is

 

 

 

considered "down" after the Prestige times out the number of times specified in the Fail Tolerance field. Use

 

 

 

a higher value in this field if your network is busy or congested.

 

 

 

 

 

 

Traffic

 

 

 

 

 

87

 

 

 

 

 

All contents copyright (c) 2005 ZyXEL Communications Corporation.

Page 87
Image 87
ZyXEL Communications 2602HWL-DXA manual Key Settings