ZyXEL Communications 2602HWL-DXA manual Speaking, Volume, Listening

Prestige 2602HWL-DxA Support Notes

To configure the phone port setting please follow the below step.

Step 1. Open the web browser from your workstation to connect to the Prestige by entering the Management IP address of the Prestige. The default management IP of Prestige is 192.168.1.1.

Step 2. Enter the administrator password appear on the page of login and click on login. The default is '1234'

Step 3. On the left column click on VoIP -> Phone -> Analog Phone -> Advanced Setup to bring you to voice function menu.

Step 4. Change the phone port parameter as you desired and click Apply when you are finish to save and let the setting to take effect.

Each field's detail description is listed below.

Label	Description
Speaking	Use this field to set the loudness that the Prestige uses for the speech signal
Volume	that it sends to the peer device. -1 is the quietest and 1 is the loudest.
Listening	Use this field to set the loudness that the Prestige uses for the speech signal
Volume	that it receives from the peer device and sends to your phone. -1 is the

137

All contents copyright (c) 2005 ZyXEL Communications Corporation.