ZyXEL Communications 2602HWL-DXA manual Key settings for authentication server

Prestige 2602HWL-DxA Support Notes

Shared Secret= *****

Accounting Server:

Active= Yes

Server Address= 192.168.1.100

Port #= 1813

Shared Secret= ******

Press ENTER to Confirm or ESC to Cancel:

Key settings for authentication server:

Option

User Name

Active

Server Address

Port

Shared Secret

Descriptions

Enter a username up to 31 alphanumeric characters long.

Press [SPACE BAR] to select Yes and press [Enter] to enable 802.1x user authentication through an external RADIUS authentication server. Select No to enable authentication using ZyXEL AP internal authentication server.

Enter the IP address of the external RADIUS authentication server.

The default port of RADIUS server for authentication is 1812. You need not change this value unless your network administrator instructs you to do so.

Specify a password (up to 31 characters) as the key to be shared between external RADIUS authentication server and ZyXEL AP (RADIUS client). The key is not send to the network. This key must be the same on the external RADIUS authentication server and ZyXEL AP.

2.If accounting is required, you must setup the external RADIUS accounting server. Normally, RADIUS authentication server and RADIUS accounting server are put in the same machine. However, they own separated UDP port and shared secret, you can separate authentication and accounting service in two different RADIUS servers. You can refer to RADIUS authentication configuration.

If you use WEB Configurator,from the Web Configurator main menu, Click Network -> Wireless Lan to setup the RADIUS authentication and accounting server configuration.

121

All contents copyright (c) 2005 ZyXEL Communications Corporation.