Chapter 10 Packages
10.13.1 Restore: Step 1
You can access this screen by clicking Protect > Restore.
Figure 144 Protect > Restore: Step 1
The following table describes the labels in this screen.
Table 85 Protect > Restore: Step 1
LABEL | DESCRIPTION |
Step 1. Select | Select a previous archive backup that you want to restore to the NSA. |
Restore Source | Select Remote NSA if the file is in another NSA in the network that you used for your |
| |
| backup. Fill in the fields below when you choose this option. |
| Select Internal or External Volume if you want to use another volume in the NSA or an |
| attached USB hard disk for your backup. Click Browse to select the backup file. |
|
|
IP Address | Enter the address of the NSA you want to use. |
|
|
User | Enter the username you use to access the NSA. |
|
|
Password | Enter the password of your NSA account. |
|
|
Share Name | Enter the name of the share you want to use. |
|
|
Test Connection | Click this to test your connection to the remote NSA that you have specified in the fields |
| above. |
|
|
258 |
|
Media Server User’s Guide | |
|
|