ZyXEL Communications 4.6 RAID, JBOD, Migrate, Migrate, Storage > Volume, Storage > Volume, PC Compatible Volume, Create a SATA volume

Chapter 4 Tutorials

Your NSA has a single bay for a SATA (Serial Advanced Technology Attachment) hard disk. JBOD is the only storage method for the NSA310S and the default storage method if you are using a single hard disk in the NSA310.

This JBOD volume shows up in the Storage > Volume screen (Section 7.2 on page 152) as follows.

When you attach an eSATA hard disk to your NSA, you can configure this volume as: 1) a backup to your SATA hard disk (RAID 1); or 2) as a separate storage drive (either another JBOD or a PC Compatible Volume).

4.7.1 Creating a RAID 1 Volume

This applies to the NSA310. This storage method allows recovery of data if your hard disk fails. To create a RAID 1 volume, you must connect an eSATA hard disk to your NSA. There are two ways to create a RAID 1 volume:

•Click the Migrate button - This is a quick way to create a RAID 1 volume. Use this to automatically synchronize data in the internal hard disk to the eSATA hard disk.

•Click the Create a SATA volume button - Use this if there are no existing volumes in your NSA.

4.7.2Migrate Button

Do the following steps to create a RAID 1 volume.

1Once you attach the eSATA hard disk to the NSA, the Storage > Volume screen shows the Migrate button.

64
	Media Server User’s Guide